FFConfigLite

Ford Focus 2 & C-Max I Module Diagnostics and Configuration

Connect to your Ford Focus 2 or C-Max using an ELM327 or ELS27 interface to access and manage various CAN-bus modules. The following functionalities are available:

Engine Control Module (ECM): Access module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM)* for the following engine types:

• ESU-411/418 (1.8 125hp/2.0 145hp)
• SIM28/29 (1.4 80hp/1.6 100hp/115hp)
• ESU-121/131 (1.8 120hp/2.0 145hp)

Instrument Cluster (Dashboard): Access module information, read and clear DTCs, configure the module, reboot the module, change the odometer reading, and perform odometer correction*.

Brake Control Module (BCM): Access module information, read and clear DTCs, configure the module, reboot the module, reset the Dynamic Stability System (DDS) calibration, and perform brake bleeding*.

Body Control Module (BCM): Access module information, read and clear DTCs, configure the module*, and reboot the module.

Safety Restraint Control Module (RCM): Access module information, read and clear DTCs, configure the module, reboot the module, and clear crash data*.

Transmission Control Module (TCM): Access module information, read and clear DTCs, and reset KAM*.

Climate Control Module (CCM): Access module information, read and clear DTCs.

Audio Control Module: Access module information, read and clear DTCs, and retrieve the radio code (for M-series)*.

* Some features are only available in the full version.

To unlock full application functionality and access additional modules, a minor modification to your ELM327 adapter may be necessary. Instructions for this modification can be found here: http://forffclub.narod.ru/index/0-2

ELS27 interfaces can be purchased at: https://els27.ru/. For ELS27USB, set the baud rate to 38400; for ELS27BT, set it to 2,000,000 using the ELS27 Baudrate utility.